3Com MSR 30, MSR 50 manual Ppp mp mp-group, Ppp mp user, Syntax ppp mp mp-group number Undo ppp mp

520CHAPTER 31: PPP AND MP CONFIGURATION COMMANDS

pppmp mp-group

Syntax ppp mp mp-group number

undo ppp mp

View Interface view

Parameter number: MP-group interface number, in the range 0 to 1023.

Description Use the ppp mp mp-groupcommand to add the current interface to the specified MP-group.

Use the undo ppp mp mp-groupcommand to remove the current interface from the specified MP-group.

This command should be used along with the interface mp-groupcommand. With the two commands, you can create an MP-group interface first and then add an interface to the MP-group. It does not matter if you reverse the two steps.

Note that only physical interfaces can be added to an MP group. Logical interfaces such as Tunnel interfaces do not support this command.

Example # Add interface Serial 3/0 to MP-group 3.

<Sysname> system-view

[Sysname] interface serial 3/0

[Sysname-Serial3/0] ppp mp mp-group 3

ppp mp user

Syntax ppp mp user username bind virtual-template number

undo ppp mp user username

View System view

Parameter username: User name, a string of 1 to 80 characters.

virtual-templatenumber: Specifies a virtual-template. The number argument is in the range of 0 to 1023.

Description Use the ppp mp user command to bind an MP user to a virtual template.

Use the undo ppp mp user command to remove the specified binding.

In establishing a PPP connection, after PPP authentication succeeds, if a virtual-template is specified, MP will be bound based on the parameters of the virtual-template and a new virtual interface will be formed to transfer data.