Schumacher IP-1800I Troubleshooting, Problem, Possible Cause, Reason/Solution, Specifications

7.TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	REASON/SOLUTION
The Instant Power™ won’t	Clips are not making a	Check for poor connection
jump start my car.	good connection to the	to battery and frame. Make
	battery.	sure connection points are
		clean. Rock clips back and
		forth for a better connection.
	Connections are reversed.	Disconnect the Instant
		Power™ and reverse the
		clips.
	The Instant Power™ bat-	Check the battery charge
	tery is not charged.	status by pressing the
		button on the front of the
		Instant Power™. See LED
		Indicators section of this
		manual.
	The vehicle’s battery is	Have the battery checked.
	defective.
The Instant Power™ won’t	The 12V device is not	Turn on the 12V device.
power my 12V device.	turned on.
	The Instant Power™ bat-	Check the battery charge
	tery is not charged.	status by pressing the
		button on the front of the
		Instant Power™. See LED
		Indicators section of this
		manual.
	The 12V device draws	Disconnect the 12V device.
	more than 15A or has a	The internal breaker will
	short circuit	automatically reset after a
		minute or two. Try the 12V
		device again. If it happens
		again, replace the 12V
		device.
The battery in the Instant	The battery is bad (will not	Have the battery checked.
Power™ won’t hold a	accept a charge).
charge.

8. SPECIFICATIONS

Internal Battery Type	Maintenance-free AGM Lead-Acid
Nominal Voltage	12V DC
Capacity	18 Ah
DC Power Outlet (Max. Continuous Load)	15A
Dimensions (H x W x D)	29.21 x 24.13 x 19,66 cm
Weight	8.5 kg.

• 9 •