3Com MSR 50, MSR 30 manual Display isis traffic-eng statistics, 1571

1571

Description Use the display isis traffic-eng network command to display information about TE networks for IS-IS.

If no IS-IS level is specified, the TE network information in the IS-IS Level-1-2 area is displayed.

Example # Display information about TE networks for IS-IS.

<Sysname> display isis traffic-eng network
		TE information for ISIS(1)
		--------------------------
Level-1 Network Information
---------------------------
DIS Router ID	: 89.1.1.1		DIS’s Ip Address			: 86.1.1.1
Status In CSPF : ACTIVE			Attached Router		Count	: 2
List of Attached		Routers
RouterId : 89.1.1.1		Nbr : 1111.1111.1111.00		Link	State : 1
RouterId : 89.2.2.2		Nbr : 1111.1111.1113.00		Link	State : 1
Total Number of TE Networks in Level-1 Area: 1, Num					Active: 1
Level-2 Network Information
---------------------------
DIS Router ID	: 89.1.1.1		DIS’s Ip Address			: 86.1.1.1
Status In CSPF : ACTIVE			Attached Router		Count	: 2
List of Attached Routers
RouterId : 89.1.1.1		Nbr : 1111.1111.1111.00		Link	State : 1
RouterId : 89.2.2.2		Nbr : 1111.1111.1113.00		Link	State : 1

Total Number of TE Networks in Level-2 Area: 1, Num Active: 1

Table 391 Description on the fields of the display isis traffic-eng network command

Field	Description
Level-1 Network Information	Level-1 network information
DIS Router ID	DR router ID
DIS’s Ip Address	IP address of the DR router
Status In CSPF	CSPF state
Attached Router Count	Number of attached routers
List of Attached Routers	List of attached routers
RouterId	Router ID
Nbr	Neighbors
Link State	Link state
Total Number of TE Networks in Level-1 Area	Total number of TE networks in the Level-1
	area
Num Active	Number of active TE links
Level-2 Network Information	Level-2 network information
Total Number of TE Networks in Level-2 Area	Total number of TE networks in the Level-2
	area

display isis traffic-eng statistics

Syntax display isis traffic-eng statistics [ process-idvpn-instance vpn-instance-name]

View Any view

Parameter process-id: IS-IS process ID, in the range 1 to 65535.