3Com MSR 30, MSR 50 manual Shutdown, Speed

172CHAPTER 8: GENERAL ETHERNET INTERFACE CONFIGURATION COMMANDS

Example # Clear the statistics of Ethernet 1/0.

<Sysname> reset counters interface ethernet 1/0

shutdown

Syntax shutdown

undo shutdown

View Ethernet interface view

Parameter None

Description Use the shutdown command to shut down an Ethernet interface.

Use the undo shutdown command to turn on Ethernet interface.

In certain circumstances, modification to the interface parameters does not immediately take effect, and therefore, you need to shut down the relative interface to make the modification work.

Example # Shut down the interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] shutdown

# Turn on the interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] undo shutdown

speed

Syntax	speed { 10 100 1000 auto }
	undo speed
View	Ethernet interface view
Parameter	10: Indicates that the interface rate is 10 Mbps.
	100: Indicates that the interface rate is 100 Mbps.
	1000: Indicates that the interface rate is 1000 Mbps.
	auto: Indicates that the interface rate is in the auto-negotiation state.

Description Use the speed command to configure Ethernet interface data rate.