3Com MSR 30, MSR 50 manual Mpls ldp timer keepalive-hold

1552 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

Example # Set the link Hello timer for local sessions to 100 seconds on interface Ethernet 1/0.

<Sysname> System-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] mpls

[Sysname-Ethernet1/0] mpls ldp

[Sysname-Ethernet1/0] mpls ldp timer hello-hold 100

# Set the targeted Hello timer for remote sessions to 1,000 seconds.

<Sysname> System-view

[Sysname] mpls ldp remote-peer BJI [Sysname-mpls-ldp-remote-bji] remote-ip 3.3.3.3

[Sysname-mpls-ldp-remote-bji] mpls ldp timer hello-hold 1000

mpls ldp timer keepalive-hold

Syntax mpls ldp timer keepalive-hold value

undo mpls ldp timer keepalive-hold

View Interface view/MPLS LDP remote peer view

Parameter value: Length of time for the Keepalive timer, in the range 1 to 65,535 seconds.

Description Use the mpls ldp timer keepalive-holdcommand to set the keepalive timers.

Use the undo mpls ldp timer keepalive-hold command to restore the defaults.

In interface view, you configure the link Keepalive timer; in MPLS LDP remote peer view, you configure the targeted Keepalive timer.

By default, both the link Keepalive timer and targeted Keepalive timer are set to 45 seconds.

c CAUTION:

■If more than one link with LDP enabled exists between two LSRs when, for example, the two LSRs are connected through multiple interfaces, the Keepalive timers of all the links must be identical for sessions to be stable.

■Changing the values of the Keepalive timers will cause existing LDP sessions to be reestablished.

Example # Set the link Keepalive timer for local sessions to 50 seconds on interface Ethernet 1/0.

<Sysname> System-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] mpls

[Sysname-Ethernet1/0] mpls ldp

[Sysname-Ethernet1/0] mpls ldp timer keepalive-hold 50