3Com MSR 50, MSR 30 manual Interface ethernet, 665

665

4 packets input, 50 bytes, 0 drops

4 packets output, 50 bytes, 0 drops

Refer to Table 117 for the description on the fields of the display interface virtual-accesscommand.

interface

Syntax interface interface-type interface-number.subnumber [ p2mp p2p ]

undo interface interface-type interface-number.subnumber

View System view

Parameter interface-typeinterface-number.subnumber: Interface type and interface number. The interface-numberargument is the primary interface number, and the subnumber argument is the sub-interface number, ranging from 0 to 1023.

p2mp: Configures the type of a WAN sub-interface to be point-to-multipoint.

p2p: Configures the type of a WAN sub-interface to be point-to-point.

Description Use the interface interface-type interface-number.subnumber [ p2mp p2p ] command to create a WAN sub-interface and enter WAN sub-interface view.

Use the undo interface command to remove the specified sub-interface.

Currently, point-to-multipoint or point-to-point sub-interfaces can be configured for ATM interfaces, frame relay interfaces or X.25 interfaces. By default, point-to-multipoint sub-interfaces are created.

A Layer 3 Ethernet interface can accommodate 1 to 4,096 sub-interfaces.

Example # Create a sub-interface on ATM 2/0.

<Sysname> system-view

[Sysname] interface atm 2/0.1

[Sysname-Atm2/0.1]

interface ethernet

Syntax interface ethernet interface-number.subnumber

undo interface ethernet interface-number.subnumber

View System view

Parameter interface-number.subnumber: Interface number. The interface-number argument is the primary interface number, and the subnumber argument is the sub-interface number, ranging from 1 to 4094.