3Com MSR 50, MSR 30 manual Display qos policy interface, 1803

1803

Table 480 Description on the fields of the display qos policy command

Field	Description
Behavior	The behavior in a policy that corresponds with a class. Each behavior can
	have multiple matching rules. For details, refer to “traffic behavior” on page
	1799.

display qos policy interface

Syntax display qos policy interface [ interface-type interface-number ] [ inbound outbound ] [ pvc { pvc-name [ vpi/vci ] vpi/vci } ] ]

View Any view

Parameters interface-typeinterface-number: Specifies an interface by its type and number.

pvc: Used for ATM interface only, i.e., policy configuration of specified PVC on specified ATM interface can be displayed.

pvc-name: PVC name.

vpi/vci: VPI/VCI value pair.

Description Use the display qos policy interface command to view the configuration and operating state about the policy on the specified interface, on the specified PVC on a particular ATM interface or on all interfaces and PVCs.

Examples # Display the configuration and operating state about the policy on the interface Ethernet 1/0 and PVC.

<Sysname> display qos policy interface Ethernet 1/0 Interface: Ethernet1/0

Direction: Outbound

Policy: test

Classifier: default-class

Matched : 0/0 (Packets/Bytes)

Rule(s) : if-match any

Behavior: be

Default Queue:

Flow Based Weighted Fair Queuing

Max number of hashed queues: 256

Matched : 0/0 (Packets/Bytes)

Enqueued : 0/0 (Packets/Bytes)

Discarded: 0/0 (Packets/Bytes)

Discard Method: Tail

Classifier: USER1

Matched : 0/0 (Packets/Bytes)

Operator: AND

Rule(s) : if-match ip-precedence 5

Behavior: USER1

Marking:

Remark IP Precedence 3

Remarked: 0 (Packets)