8 en VG4 Firmware Updates via a TCP/IP NetworkAutoDome Modular Camera System
| 3. | System Controller (SC) Main/VCA Main: If the service pack contains only the SC/VCA |
|
| Main files, you can upload these files without a corresponding upload of the SC/VCA Boot |
|
| file. However, if the service pack contains an SC/VCA Boot file upgrade, there can be |
|
| incompatibility issues if the SC/VCA Boot is not uploaded before the SC/VCA Main file. |
| 4. | Custom Language: Certain Service Pack include an optional language file to upgrade the |
|
| VG4 AutoDome |
1.7.2 | Selecting and Uploading Firmware Files | |
| To upload the service pack firmware, use the following procedure: | |
| 1. | Check the version of the SC firmware file to determine the service that you must start |
|
| with. See Section 1.4.2 Selecting the Service Pack, page 4. |
| 2. | Click the Search button next to the Firmware Upload field; then browse to the directory |
|
| that contains the firmware files. |
Figure 1.4 Choose firmware directory
3.Select the appropriate firmware update file and click Open.
a.If a service pack contains an IP upgrade file (vip_x_app1.fw), you must upload this file first, before performing any other firmware update. (For example, before uploading the SCBootApp.g4i or the SCMain.g4i files.)
b.If a service pack contains an upgrade to the SC Boot file and to the VCA Boot file, you must upload these files before uploading the SC Main and VCA_app file. The boot files are stored in a separate Boot directory. Always check for and install these files before installing the SC Main and VCA_app files. Browse to and open the Boot directory, then install the SCBootApp.g4i file before installing the SCMain.g4i files
CAUTION! If a service pack contains an upgrade to the IP firmware file (Vip_x_app1.fw), you
!must upgrade the IP firmware before you perform any other firmware update. (For example, before uploading SCBootApp.g4i or SCMain.g4i).
F.01U.097.269 1.06 2011.09 | Firmware Update Manual | Bosch Security Systems, Inc. |
