Bosch Appliances VG4 manual Launching the Ctfid Software, Launching with a Bilinx Connection

AutoDome Modular Camera SystemVG4 Firmware Updates via the CTFID en 17

2.4	Launching the CTFID Software
	You must install the CTFID software on the computer from which you will configure a camera.
	To install the CTFID software, refer to the CTFID User’s Manual for instructions.
	The method in which the CTFID software responds depends on the type of connection (Bilinx
	or serial) it detects. The CTFID initially checks for a Bilinx connection through a USB port. If
	the CTFID does not detect a Bilinx connection, the software prompts you to identify the type
	of serial connection.
2.4.1	Launching with a Bilinx Connection
	If using a Bilinx connection, use the following instructions to launch the CTFID software:
	1. Double-click the CTFID icon on the Windows Desktop. The CTFID software automatically

checks for the Bilinx signal from the VG4 AutoDome. Once connected, the CTFID displays the Main Screen:

Figure 2.4 CTFID Main Screen

2.Proceed to Section 2.5 Uploading VG4 AutoDome Firmware Files, on page 20.

Bosch Security Systems, Inc. Firmware Update Manual F.01U.097.269 1.06 2011.09