Bosch Appliances manual Upgrading the VG4 200 or 300 Series AutoDome

14 en VG4 Firmware Updates via the CTFIDAutoDome Modular Camera System

2.2	Upgrading the VG4 200 or 300 Series AutoDome
	The firmware upgrade process for a VG4 200 or 300 Series AutoDome requires updates to one
	or all of the following files:
	File Name	AutoDome Series/Module	Function
	Vip_x_app1.fw	IP Communications Module	Updates the IP Comms module firmware.
	SCBootApp.g4i	200, 300, 500i	Updates the system controller boot firmware.
	SCMain.g4i	200, 300, 500i	Updates the system controller firmware.
	FPGA_SC.g4i	200, 300	Updates the FPGA chip.
	FPGA_VCA.g4i	500i	Updates the FPGA chip.
	VCA_boot.g4i	500i	Updates PTZ camera Video Content Analysis
			firmware. Install this file during the installation
			of the SCBoot.g4i file.
	VCA_app.g4i	500i	Updates PTZ camera Video Content Analysis
			firmware. Install this file during the installation
			of the SCMain.g4i file.
	language_Lang	200, 300, 500i	Uploads an additional language file for the VG4
			on-screen display menus.
	The next sections contain information and instructions you need before upgrading a VG4 200
	or 300 Series AutoDome with the CTFID application.
2.2.1	Determining Minimum Requirements

The table below summarizes the information for the first full production versions of the VG4 200 or 300 Series AutoDome firmware. If the AutoDome receiving an upgrade contains firmware files older than the files below, the AutoDome is considered a pre-production model. To determine the versions of the firmware files:

1.Issue the ON-66-ENTERcommand twice, in quick succession.

The AutoDome displays the current firmware levels for the AutoDome files.

2.Compare the firmware levels with the following table:

Component	First Released Version	Release Date
SC Boot (SCBootApp.g4i)	01.00.00.01	November 2006
SC Main (SCMain.g4i)	01.00.00.02	November 2006
VCA_App.g4i	01.00.00.01	April 2007
VCA_boot (VCA_boot.g4i)	00.06.00.00	April 2007
IP-Panel (vip_x_app1.fw)	2.00.00.58	November 2006

Service packs may not properly update a pre-production model. If you do need to update a pre-production model, follow the special instructions in Section 3.1 Pre-production Firmware Versions (All Models), on page 31.

F.01U.097.269 1.06 2011.09 Firmware Update Manual Bosch Security Systems, Inc.