AutoDome Modular Camera System | VG4 Firmware Updates via the CTFID en 21 |
|
|
3.Navigate to the location of the firmware update file.
4.Select the appropriate file for your Device Model and Video Type; then click OK.
Figure 2.10 Select VG4 100 Series Firmware Image File
The CTFID displays a message warning you that the firmware update process erases all device settings and returns the settings to the factory default value.
5.Click OK to accept the warning and to start the update process.
The CTFID begins the firmware update and marks the update progress at the bottom of the screen. This process may take several minutes to complete.
6.Once the firmware update is complete, the CTFID displays a message that the firmware update was successful.
7.Click OK to confirm the message.
8.The CTFID reloads the settings from the camera and displays the Device Information screen.
9.Ensure that the Firmware Version field reflects the new firmware version.
2.5.2 | Uploading a VG4 200 or VG4 300 Series AutoDome Service Pack | |||
| The table below summarizes the information for the first full production versions of the VG4 | |||
| AutoDome firmware. |
|
| |
|
|
|
|
|
| Component | First Released Version | Release Date |
|
| SCBootApp.g4i | 01.00.00.01 | November 2006 |
|
| SCmain.g4i | 01.00.00.02 | November 2006 |
|
| VCA_app.g4i | 01.00.00.01 | April 2007 |
|
| VCA_boot.g4i | 00.06.00.00 | April 2007 |
|
If the AutoDome receiving an upgrade contains firmware older than the files above, then the AutoDome is considered a
Bosch Security Systems, Inc. | Firmware Update Manual | F.01U.097.269 1.06 2011.09 |
