AutoDome Modular Camera SystemVG4 Firmware Updates via the CTFID en 15
2.2.2Selecting the Service Pack
The VG4 AutoDome service packs are cumulative. Before you begin a firmware update, check the version of the System Controller Main (SC) firmware currently installed in the AutoDome. The SC Main firmware version determines the service pack with which you must start. To determine the SC Main firmware version:
1. Issue the
The AutoDome displays the current firmware levels for the AutoDome files. The SC Main firmware level is enclosed in the box in the illustration below.
Bosch Security Sys. AutoDome(r)
500Series Day/Night 26X
1.06.00.04/1.05.00.02
2.00.00.00
FastAddress: Not Set
Figure 2.1 Display Software Version Menu
2.Compare the SC Main firmware level with the following table:
System Controller Main | Start with Service Pack | Release Date |
|
|
|
1.00.00.02 to 1.04.00.02 | 1.01 | July 12, 2007 |
|
|
|
1.05.00.02 | 1.02 | October 2, 2007 |
|
|
|
1.06.00.04 | 1.03 | November 19, 2007 |
|
|
|
1.07.00.01 | 1.04 | January 11, 2008 |
|
|
|
1.08.00.02 | 1.05.01 | September, 16 2008 |
|
|
|
Note: This table contains the latest information as of Service Pack 1.05.01. For subsequent service packs, refer to the table in the service pack release notes.
3.Download the appropriate service packs from www.boschsecurity.com and install each sequentially.
Refer to Section 3.2 VG4 Series Firmware Version Identification, on page 31, for more information.
2.3Hardware Connections
This section provides a brief description of the devices necessary to connect a PC (with the CTFID software installed) to a VG4 AutoDome. Refer to the AutoDome Modular Camera System Installation Manual and to the CTFID User’s Manual for detailed connection information.
Bosch Security Systems, Inc. | Firmware Update Manual | F.01U.097.269 1.06 2011.09 |
