3Com MSR 30, MSR 50 manual Display mpls ldp peer, Related command display mpls ldp

1522 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

Related command: display mpls ldp.

Example # Display information about all LSPs established by LDP.

<Sysname> display mpls ldp lsp

LDP LSP Information

--------------------------------------------------------------------------

SN	DestAddress/Mask In/OutLabel		Next-Hop	In/Out-Interface
--------------------------------------------------------------------------				1
	1.1.1.1/32	3/NULL	127.0.0.1	Ser2/0/InL0
2	10.1.1.0/24	3/NULL	10.1.1.1	Ser2/0/Eth1/1
*3	100.1.1.1/32	Liberal (1025)
--------------------------------------------------------------------------				A
’*’ before an LSP means the LSP is not established
A ’*’ before a Label means the USCB or DSCB is stale
Table 373 Description on the fields of the display mpls ldp lsp command
Field		Description
SN		Sequence number of the LSP. A “*” before an SN means that the
		LSP is not established.
DestAddress/Mask		Destination address and the mask of the LSP
In/OutLabel		Incoming label/outgoing label. A “*” before an LSP means that the
		LSP is in the GR process. Liberal (X) means that the LSP is not
		available and the label value is X.
Next-Hop		Address of the next hop
In/Out-Interface		Incoming interface/outgoing interface

display mpls ldp peer

Syntax display mpls ldp peer [ peer-id ] [ vpn-instancevpn-instance-name [ verbose ] [ peer-id ] ] [ { begin exclude include } regular-expression ]

display mpls ldp peer [ all ] [ verbose ] [ { begin exclude include } regular-expression ]

View Any view

Parameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.

peer-id: LSR ID of the peer.

verbose: Displays detailed information.

: Filters the output information.

begin: Begins with the specified string.

include: Includes the specified string.

exclude: Excludes the specified string.

regular-expression: Regular expression, a string of 1 to 80 characters. No blank space is acceptable.