3Com MSR 30, MSR 50 - page 485

485
<Sysname> debugging lacp packet interface ethernet 1/1
*0.60323 Sysname LAGG/8/Pkt:
Send LACP Packet via port Ethernet1/1
// The device sent an LACP protocol packet through Ethernet 1/1.
*0.60323 Sysname LAGG/8/Pkt:
size=128, subtype =1, version=1
// The length of the LACP packet was 128 bytes, the protocol sub type was 1, and
the version number was 1.
Actor: tlv=1, len=20, sys-pri=0x8000, sys-mac=00e0-fc02-0300, key=0x
1, pri=0x8000, p=0x2, state=0x45
// The local port information carried in the packet was as follows:
■length: 20
■system LACP priority: 0x8000
■system MAC address: 00e0-fc02-0300
■port operation key: 0x1
■port LACP priority: 0x8000
■port number: 0x2
■current LACP state flag of the port: 0x45
Partner: tlv=2, len=20, sys-pri=0x0, sys-mac=0000-0000-0000, key=0x0
, pri=0x0, p=0x0, state=0x0
// The peer port information carried in the packet was as follows:
■length: 20
■system LACP priority: 0x0
■system MAC address: 0000-0000-0000
■port operation key: 0x0
■port LACP priority: 0x0
■port number: 0x0
■current LACP state flag of the port: 0x0
Collector: tlv=3, len=16, col-max-delay=0
// The content of the Collector field in the protocol packet was as follows:
■length: 16
■maximum delay: 0
Terminator: tlv=0, len=0
// The length of the Terminator field in the protocol packet is 0.
*0.1221133 Sysname LAGG/8/Pkt:
Receive LACP Packet via port Ethernet1/1