3Com MSR 30 Display stop-accounting-buffer, Which is a string of 1 to 32 characters, On August 31

1956 CHAPTER 128: RADIUS CONFIGURATION COMMANDS

Table 511 Description on the fields of the display radius statistics command

Field	Description
State Mismatch	Number of errors for mismatching status
Other_Error	Number of errors of other types
No-response-acct-stop packet	Number of times that no response was received for
	stop-accounting packets
Discarded No-response-acct-stop	Number of stop-accounting packets that were buffered but
packet for buffer overflow	then discarded due to full memory

display stop-accounting-buffer

Syntax	display stop-accounting-buffer { radius-scheme radius-scheme-namesession-id
	session-id time-rangestart-time stop-time user-nameuser-name }
View	Any view
Parameter	radius-schemeradius-scheme-name: Specifies a RADIUS scheme by its name,
	which is a string of 1 to 32 characters.
	session-idsession-id: Specifies a session by its ID. The ID is a string of 1 to 50
	characters.
	time-rangestart-timestop-time: Specifies a time range by its start time and end
	time in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
	user-nameuser-name: Specifies a user by the user name, which is a case-sensitive
	string of 1 to 80 characters. The format of the user-nameargument (for example,
	whether the domain name should be included) must comply with that specified
	for usernames to be sent to the RADIUS server in the RADIUS scheme.
Description	Use the display stop-accounting-buffercommand to display information
	about the stop-accounting requests buffered in the device by scheme, session ID,
	time range, or user name.

	If receiving no response after sending a stop-accounting request to a RADIUS
n server, the device buffers the request and retransmits it. You can use the retry
	stop-accountingcommand to set the number of allowed transmission attempts.
Related command:	reset stop-accounting-buffer,stop-accounting-buffer enable (HWTACACS
	scheme view), user-name-format (HWTACACS scheme view), retry
	stop-accounting (HWTACACS scheme view).
Example	# Display information about the buffered stop-accounting requests from 0:0:0 to
	23:59:59 on August 31, 2006.

<Sysname> display stop-accounting-buffer time-range 0:0:0-08/31/2002

23:59:59-08/31/2006

Total find 0 record (0)