3Com MSR 50, MSR 30 manual Display interface null, Display interface virtual-ethernet

661

The “Hold timer” field of the display interface mp-groupcommand represents the hold time of the link state (up/down) of the current interface, and the “LCP initial” field indicates that the link control protocol (LCP) is initialized. Refer to Table 117 for the description on the other fields.

display interface null

Syntax display interface null [ 0 ]

View Any view

Parameter 0: Null interface number. This argument is always 0.

Description Use the display interface null command to view the state information about the null interface. Even if this argument is not specified, the state information about null interface 0 is displayed, because there is only one interface.

Related command: interface null.

Example # View the state information about null 0.

<Sysname> display interface null 0 NULL0 current state :UP

Line protocol current state :UP (spoofing)

Description : NULL0 Interface

The Maximum Transmit Unit is 1500

Internet protocol processing : disabled

Physical is NULL DEV

Last 300 seconds input: 0 bytes/sec 0 packets/sec

Last 300 seconds output: 0 bytes/sec 0 packets/sec 0 packets input, 0 bytes, 0 drops

0 packets output, 0 bytes, 0 drops

Refer to Table 117 for the description on the fields of the display interface null command.

display interface virtual-ethernet

Syntax display interface virtual-ethernet [ number ]

View Any view

Parameter number: Virtual Ethernet (VE) interface number, which can be the number of any existing VE interface.

Description Use the display interface virtual-ethernet command to view the state information about the existing VE interfaces. If you do not provide a VE interface number, this command will display the state information about all the existing VE interfaces.