2032 CHAPTER 133: NAT CONFIGURATION COMMANDS

 

<Sysname> system-view

 

[Sysname]undo nat connection-limit-policy 1

 

 

nat log enable

 

Syntax

nat log enable [ acl acl-number]

 

undo nat log enable

View

System view

Parameter

acl acl-number: Enables the NAT log function for the data flows that match the

 

specified ACL. The acl-numberparameter ranges from 2,000 to 3,999. Absence of

 

this parameter indicates that NAT log function applies to all data flows.

Description

Use the nat log enable command to enable the NAT log function.

 

Use the undo nat log enable command to disable the NAT log function.

 

By default, the NAT log function is disabled.

Example

# Enable the NAT log function.

 

<Sysname> system-view

 

[Sysname] nat log enable acl 2001

 

# Disable the NAT log function.

 

<Sysname> system-view

 

[Sysname] undo nat log enable

 

 

nat log flow-active

 

Syntax

nat log flow-active minutes

 

undo nat log flow-active

View

System view

Parameter

minutes: Interval in logging the active NAT sessions, in the range 10 to 120

 

minutes.

Description

Use the nat log flow-activecommand to enable logging for NAT active sessions

 

and specify the interval in creating and sending the logs.

 

Use the undo nat log flow-activecommand to disable this function.

 

By default, this function is disabled.

Page 2032
Image 2032
3Com MSR 30, MSR 50 manual Nat log enable, Nat log flow-active