3Com MSR 50 manual Itf CE1/PRI interface view, Itf number number type 7e ff, Undo itf type number

209

Use the undo idlecode command to restore the default, that is, 0x7E.

The line idle code is sent in the timeslots that are not bundled into logical channels.

Example # Set the line idle code to 0x7E on CE1/PRI interface E1 2/0.

<Sysname> system-view

[Sysname] controller e1 2/0

[Sysname-E1 2/0] idlecode 7e

itf (CE1/PRI interface view)

Syntax	itf { number number type { 7e ff } }
	undo itf { type number }
View	CE1/PRI interface view
Parameter	number number: Sets the number of interframe filling tags, which ranges from 0
	to 14.
	type { 7e ff }: Sets the type of interframe filling tag to 0x7E by specifying the 7e
	argument or to 0xFF by specifying the ff keyword.
Description	Use the itf command to set the type of and the number of interframe filling tags
	on the CE1/PRI interface. Two types of interframe filling tag are available: 0x7E
	and 0xFF.
	Use the undo itf command to restore the default.
	By default, interframe filling tag is 0x7E and the number of interframe filling tags
	is 4.
	Interframe filling tags are sent when no service data is sent on the timeslots
	bundled into logical channels on the CE1/PRI interface.
Example	# Set the type of interframe filling tag to 0xFF on CE1/PRI interface E1 2/0.
	<Sysname> system-view
	[Sysname] controller e1 2/0
	[Sysname-E1 2/0] itf type ff
	# Set the number of interframe filling tags to five on CE1/PRI interface E1 2/0.
	<Sysname> system-view
	[Sysname] controller e1 2/0
	[Sysname-E1 2/0] itf number 5