3Com MSR 50, MSR 30 manual Update message information of L3VPN labeled routes, 1031

1031

receive: Enables/disables the debugging for received BGP labeled route update packets.

send: Enables/disables the debugging for sent BGP labeled route update packets.

verbose: Displays detailed debugging information.

Description Use the debugging bgp update label-routecommand to enable debugging for BGP labeled route update messages.

Use the undo debugging bgp update label-route command to disable debugging for BGP labeled route update messages.

By default, this debugging is disabled.

Enabling debugging may affect system performance; therefore, use this command only when necessary and disable debugging once the debugging operation is complete.

Examples # Device A and Device B have established a BGP peer relationship and MPLS has been enabled on the connected interfaces. Enable debugging for BGP labeled route update messages.

<Sysname> debugging bgp update route-label *Sep 4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:

BGP.: Send UPDATE to peer 2.2.2.2 for following destinations :

*Sep	4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:
	Origin		: Incomplete
	AS Path		:
	Next Hop		: 1.1.1.1
	Local Pref		: 100
	MED		: 0
	111.1.1.1/32		(1024)
*Sep	4 16:14:32:22 2006 Sysname RM/6/RMDEBUG:
	BGP_L3VPN.: Recv UPDATE from 2.2.2.2 with following destinations :
	Update message length : 76
	Local Pref		: 100
	MED		: 0
	Origin		: Incomplete
	AS Path		:
	Next Hop		: 2.2.2.2
	111.2.2.2/32		(1025)
// Update message information of L3VPN labeled routes
*Sep	4 16:17:20:642 2006 Sysname RM/6/RMDEBUG:
	BGP.: Send UPDATE to 100::2 for following destinations :
	Origin	: Incomplete
	AS Path	:
	Next Hop	: 100::1
	Local Pref	: 100
	MED	: 0
	100::/64(1025),
*Sep	4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
	BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :

Update message length : 86