3Com MSR 50, MSR 30 manual Stopbits, Terminal type

2473

	The command is only applicable to asynchronous serial interfaces including AUX
n and Console ports.
Example	# Set the transmission rate on the user interface AUX 0 to 19200 bps.
	<Sysname> system-view
	[Sysname] user-interface aux 0
	[Sysname-ui-aux0] speed 19200
stopbits
Syntax	stopbits { 1 1.5 2 }
	undo stopbits
View	User interface view
Parameter	1: 1 stop bit.
	1.5: 1.5 stop bits.
	2: 2 stop bits.
Description	Use the stopbits command to set the stop bits on the user interface.
	Use the undo stopbits command to restore the default, or one stop bit.
	The command is only applicable to asynchronous serial interfaces including AUX
n and Console ports.
Example	# Set the stop bits on the user interface to 1.5.
	<Sysname> system-view
	[Sysname] user-interface aux 0
	[Sysname-ui-aux0] stopbits 1.5
terminal type
Syntax	terminal type { ansi vt100 }
	undo terminal type
View	User interface view
Parameter	ansi: Specifies the terminal display type as ANSI.
	vt100: Specifies the terminal display type as VT100.

Description Use the terminal type command to configure the type of terminal display.