3Com MSR 30, MSR 50 pim timer hello, pim timer join-prune

1418 CHAPTER 90: PIM CONFIGURATION COMMANDS
Description Use the pim timer graft-retry command to configure the graft retry period.
Use the undo pim timer graft-retry command to restore the default setting.
By default, the graft retry period is 3 seconds.
Example # Set the graft retry period to 80 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim timer graft-retry 80
pim timer hello
Syntax pim timer hello interval
undo pim timer hello
View Interface view
Parameter interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description Use the pim timer hello command to configure on the current interface the
interval at which hello messages are sent.
Use the undo pim timer hello command to restore the default setting.
By default, hello messages are sent at the interval of 30 seconds.
Related command: timer hello (PIM view).
Example # Set the hello interval to 40 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim timer hello 40
pim timer join-prune
Syntax pim timer join-prune interval
undo pim timer join-prune
View Interface view
Parameter interval: Join/prune interval in seconds, with an effective range of 1 to
2,147,483,647.