3Com MSR 30, MSR 50 manual Display radius scheme, Related command display radius scheme

1952 CHAPTER 128: RADIUS CONFIGURATION COMMANDS

Related command: display radius scheme.

Example # Define RADIUS scheme radius1 to send data flows and packets destined for the RADIUS server in kilobytes and kilo-packets.

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet

display radius scheme

Syntax display radius scheme [ radius-scheme-name]

View Any view

Parameter radius-scheme-name: RADIUS scheme name.

Description Use the display radius scheme command to display the configuration information of a specified RADIUS scheme or all RADIUS schemes.

Related command: radius scheme.

Example # Display the configurations of all RADIUS schemes.

<Sysname> display radius scheme

------------------------------------------------------------------

SchemeName = systemradius1
Index=0			Type=extended
Primary Auth IP		=127.0.0. 1.1.1.1	Port=1645 = 1812		State=block
= active
Primary Acct IP		=127.0.0.1 1.1.1.1	Port=1646 = 1813		State=bloc
k = active
Second	Auth IP	= 0.0.0.0	Port= = 1812	State= = block
Second	Acct IP	= 0.0.0.0	Port= = 1813	State= = block
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting-On packet disable, send times = 5 , interval = 3s
Interval for timeout(second)				=3
Retransmission times for timeout				=3
Interval for realtime accounting(minute)				=12
Retransmission times of realtime-accounting packet				=5
Retransmission times of stop-accounting packet				=500
Quiet-interval(min)				=5
Username format				=without-domain
Data flow unit				=Byte
Packet unit				=one
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 510 Description on the fields of the display radius scheme command
Field		Description
SchemeName		Name of the RADIUS scheme
Index		Index number of the RADIUS scheme
Type		Type of the RADIUS server