3Com MSR 50, MSR 30 manual Debugging dhcp relay, Sending a DHCP-ACK message

757

Message type: reply
Hardware type: 1, Hardware address length: 6
Hops: 0, Transaction ID: 2294688324
Seconds: 0, Broadcast flag: 0
Client IP address: 0.0.0.0	Your IP address: 22.0.0.2
Server IP address: 0.0.0.0	Relay agent IP address: 22.0.0.1
Client hardware address: 00e0-fc14-1601
Server host name: Not Configured, Boot file name: Not Configured
DHCP message type: DHCP Ack
*0.279172 Sysname DHCPS/7/DHCPS_DEBUG_COMMON:
DhcpServer: Send DHCPACK to 00e0.fc14.1601-Vlan-interface2 Offer IP=> 22.0.0
.2 via 22.0.0.1.
// Sending a DHCP-ACK message

debugging dhcp relay

Syntax	debugging dhcp relay { all error event packet [ client mac mac-address] }
	undo debugging dhcp relay { all error event packet [ client mac mac-address] }
View	User view
Default Level	1: Monitor level
Parameters	all: All types of debugging for DHCP relay agent.
	error: DHCP relay agent error debugging.
	event: DHCP relay agent event debugging.
	packet: DHCP relay agent packet debugging.
	client mac mac-address: Debugging for packets that the DHCP relay agent
	forwards for a specific DHCP client. mac-addressis the MAC address of the DHCP
	client, in the format of H-H-H.
Description	Use the debugging dhcp relay command to enable DHCP relay agent
	debugging.
	Use the undo debugging dhcp relay command to disable DHCP relay agent
	debugging.
	By default, DHCP relay agent debugging is disabled.

Table 141 Description on the fields of the debugging dhcp relay packet command

Field	Description
RX/TX, Message-Type, interface	Receiving or forwarding the message of the
interfacename.	Message-Typetype through the interface
	interfacename
Message type: MessageType	Content of the first byte in the DHCP message, that is,
	the DHCP message type, request or reply.