3Com MSR 50 Hold timer expired on BGP peer, User view, Monitor level, Update messages, Complete

	1025
	// The hold timer expired on BGP peer 2.2.2.2.
debugging bgp update
Syntax	debugging bgp update [ acl acl-numberip-prefix ip-prefix-name] [ receive send ] [
	verbose ]
	undo debugging bgp update [ acl acl-numberip-prefix ip-prefix-name] [ receive
	send ] [ verbose ]
View	User view
Default Level	1: Monitor level
Parameters	acl acl-number:Specifies an access control list (ACL) for filtering packet
	debugging information. The acl-numberargument ranges from 2000 to 3999.
	ip-prefixip-prefix-name: Specifies an IP prefix list for filtering the packet
	debugging information. ip-prefix-nameis a string of 1 to 19 characters.
	receive: Enables the debugging for received BGP packets.
	send: Enables the debugging for sent BGP packets.
	verbose: Displays detailed debugging information.
Description	Use the debugging bgp update command to enable debugging for BGP
	Update messages.
	Use the undo debugging bgp update command to disable debugging for BGP
	Update messages.
	By default, this debugging is disabled.
	Enabling debugging may affect system performance; therefore, use this command
	only when necessary and disable debugging once the debugging operation is
	complete.

Table 230 Description on the fields of the debugging bgp update command

Field Description

BGP.xxx

Err/SubEr

Errdata:

x.x.x.x/xx

RPM policy failed for policy :

name:xx :

INBOUND tnl id

BGP instance name Error code/error subcode Error data Destination address/mask Failed to pass policy xx

Inbound policy

Tunnel ID