3Com MSR 50, MSR 30 manual Display mpls rsvp-te psb-content, 1577

1577

Table 397 Description on the fields of the display mpls rsvp-te peer command

Field	Description
RSB Count	Number of reservation state blocks
Hello Type Sent	Type of hellos sent to the neighbor: REQ, ACK, or NONE
Neighbor Hello Extension	State of hello extension: enabled or disabled. This field is
	displayed only when hello extension is enabled on the interface.
SRefresh Enable	State of summary refresh: YES for enabled and NO for disabled
Reliability Enable	State of the reliability function: YES for enabled and NO for
	disabled
Graceful Restart State	Neighbor’s GR status: Not ready, Ready, Restart, or Recovery.
	Displayed as --- when not supported by the device.
Restart Time	GR restart interval in seconds
Recovery Time	GR recovery interval in seconds

display mpls rsvp-te psb-content

Syntax display mpls rsvp-tepsb-contentingress-lsr-id lspid tunnel-id egress-lsr-id [ { begin include exclude } regular-expression ]

View Any view

Parameter ingress-lsr-id: Ingress LSR ID.

lspid: Local LSR ID, in the range 1 to 65,535.

tunnel-id: Tunnel ID, in the range 0 to 65,535.

egress-lsr-id: Egress LSR ID.

: Filters output by regular expression.

begin: Displays information beginning with a defined regular expression.

include: Displays information that includes a defined regular expression.

exclude: Displays information that excludes a defined regular expression.

regular-expression: Regular expression, a string of 1 to 80 characters without spaces.

Description Use the display mpls rsvp-tepsb-contentcommand to display information about RSVP-TE PSB.

Example # Display PSB information.

<Sysname>		display mpls rsvp-te psb-content 19.19.19.19 1 0 29.29.29.29
The PSB	Content:
Tunnel	Dest: 29.29.29.29		Session Tunnel ID: 0
Tunnel	ExtID: 19.19.19.19
Ingress LSR ID: 19.19.19.19			Local LSP ID: 1
Previous		Hop : 101.101.101.1	Next Hop : -----
Incoming		/ Outgoing Interface: Ethernet1/0 / -----