3Com MSR 30, MSR 50 Display virtual-access, For description on the output fields, refer to Table

506CHAPTER 31: PPP AND MP CONFIGURATION COMMANDS

Table 83 Description on the fields of the display ppp mp command

Field	Description
0 reordered	Number of the packets reassembled
0 unassigned	Number of the packets waiting for being reassembled
0 interleaved	Number of the interleaved packets
sequence 0/0 rcvd/sent	Received sequence number/sent sequence number
The member channels bundled are	The following displays all the member channels bundled
	on this logical channel
Serial1/1:15 Up-Time:2005/03/13	Subchannel Serial1/1:15 is up at 19:54:23:60 on March
19:54:23:60	13, 2005
Inactive member channels	List of inactive subchannels

# Display information about MP interfaces, which are configured via MP-groups.

<Sysname> display ppp mp Mp-group is Mp-group0

max-bind: 20, min-fragment: 128 ,LFI max-delay: 100

Bundle Multilink, slot 0, Master link is Mp-group0 Peer’s endPoint descriptor: 1e9935f57c85

Bundle Up Time: 2005/03/13 19:54:23:60

0 lost fragments, 0 reordered, 0 unassigned, 0 interleaved,

sequence 0/0 rcvd/sent
Member channels: 6 active, 4 inactive
Serial1/1:15	Up-Time:2005/03/13	19:54:23:60
Serial1/1:16	Up-Time:2005/03/13	19:54:23:60
Serial1/1:17	Up-Time:2005/03/13	19:54:23:60
Serial1/1:18	Up-Time:2005/03/13	19:54:23:60
Serial1/1:19	Up-Time:2005/03/13	19:54:23:60
Serial1/1:20	Up-Time:2005/03/13	19:54:23:60
Serial1/1:21	(inactive)
Serial1/1:22	(inactive)
Serial1/1:23	(inactive)
Serial1/1:24	(inactive)

For description on the output fields, refer to Table 83.

display virtual-access

Syntax display virtual-access[ va-number dialer dialer-number peer peer-address user user-name vt vt-number ] *

View Any view

Parameter va-number: VA interface number, in the range 0 to 128.

dial dialer-number: Specifies a dialer interface number, which is in the range of 0 to 1023.

peer peer-address: Specifies the IP address of the peer of the VA interface, expressed in dotted decimal notation.

user user-name: Specifies a user name used for logging in through the VA interface. The user-nameargument is a string of 1 to 80 characters.