3Com MSR 50 manual Ike next-payload check disabled, Related command remote-name,id-typename, 2163

2163

Parameter name: Name of the local gateway for IKE negotiation, a string of 1 to 32 characters.

Description Use the ike local-namecommand to configure a name for the local gateway.

Use the undo ike local-namecommand to restore the default.

By default, the device name is used as the name of the local gateway

If the IKE negotiation initiator uses the gateway name to perform IKE negotiation (that is, the id-type name command is configured on the initiator), you need to configure the ike local-namecommand on the local device. The IKE negotiation initiator sends its gateway name as identification to its peer and the peer uses the gateway name configured with the remote-namename command to authenticate the initiator. Therefore, make sure the local gateway name for a device is identical to the remote gateway name configured on its peer.

Related command: remote-name,id-typename.

Example # Configure the local gateway name as app.

<Sysname> system-view

[Sysname] ike local-name app

ike next-payload check disabled

Syntax ike next-payload check disabled

undo ike next-payload check disabled

View System view

Parameter None

Description Use the ike next-payload check disabled command to disable the checking of the Next payload field in the last payload of an IKE message during IPSec negotiation, gaining interoperation with products assigning the field a value other than zero.

Use the undo ike next-payload check disabled command to restore the default.

By default, the Next payload field is checked.

Example # Disable Next payload field checking for the last payload of an IKE message.

<Sysname> system-view

[Sysname] ike next-payload check disabled