3Com MSR 50, MSR 30 manual Link Aggregation Debugging Commands, Debugging lacp packet

LINK AGGREGATION DEBUGGING

28 COMMANDS

debugging lacp packet

Syntax debugging lacp packet [ interface interface-type interface-number [ to interface-type interface-number ] ]

undo debugging lacp packet [ interface interface-type interface-number [ to interface-type interface-number ] ]

View User view

Default Level 1: Monitor level

Parameters interface-type interface-number: Port type and port number.

to: Specifies the ports with their port type and port number within the port range enclosed by the two interface-type-interface-numberargument pairs around this keyword.

Description Use the debugging lacp packet command to enable debugging for LACP protocol packets on the specified port(s).

Use the undo debugging lacp packet command to disable debugging for

LACP protocol packets on the specified port(s).

By default, debugging for LACP protocol packets is disabled on a port.

If no port is specified, the command applies to all the ports running LACP.

Table 76 Description on the fields of the debugging lacp packet command

Field	Description
size	Size of a protocol packet, which is 128 bytes.
subtype	Sub type of a protocol packet, which is 1 for
	LACP protocol packets.
version	Protocol version, which is 1 for LACP.