Muratec IF-200 operating instructions Update Firmware, Factory Defaults

Appendix B

RX packets	number of reception
	attempts
TX errors	number of transmission
	errors
RX errors	number of reception errors
CRC errors	source of reception errors
RUNT errs	source of reception errors
DATA errs	source of reception errors
OOW errors	source of reception errors
JABBER err	source of reception errors
Collisions	source of reception errors
Underruns	source of transmission
	errors
RX misses	source of reception errors

7.5. Update Firmware

If the IF-200 has received a firmware update, the user must go to the Advanced Settings menu, Update Firmware option and accept (Yes) or discard (No) the received update.

Alternatively, the user may configure the IF-200 to automatically accept and apply firmware updates. To enable this feature, go to SETUP->Advanced Settings->Expert Setting->Auto Apply Firmware and select YES.

NOTE: Firmware updates are received as special email messages.

7.6. Factory Defaults

Factory Defaults deletes all of the settings you entered and resets the IF-200 back to the factory installed defaults. All ISP and mailbox information is lost.

To set the IF-200 back to the factory installed defaults, press SETUP from the Main screen. Scroll to Advanced Settings and press EDIT. Scroll to Factory Defaults and press EDIT.

WARNING

Once deleted, there is no way to recover the settings.

31