Muratec IF-200 operating instructions System Settings and Options

IF-200 from Muratec

6.2. System Settings

To change any of these settings, press SETUP from the Main screen. Scroll to System Settings and press EDIT. Use the scroll keys to move to the field you want to change and press EDIT. Make the change and press OK. Press ESC until you return to the Main screen.

Table 3. System Settings and Options

SETTING	OPTIONS AND DESCRIPTION (Default settings are in
	BOLD type)
DATE	Current date.
TIME	Current time.
Time Zone	Time zone for your geographic region.
Time Display	AM-PM, 24-HR. Whether you want time displayed in
	military (24-HR) or 12 hour (AM-PM) time.
Phone Dialing Prefix	Digit(s) to be dialed prior to any phone number stored in the
	IF-200 (i.e. 9).
Netmask IP Address	Network mask.
Gateway IP Address	IP address of router.
IF-200 Address	Static, Use DHCP, Use RARP, AUTO ASSIGN IP. You may
	specify a static IP address, use DHCP to obtain an IP address,
	use RARP to obtain an IP address, or auto assign an IP
	address. When the IF-200 auto assigns an IP address, it first
	uses DHCP and then RARP (if DHCP fails) to obtain an IP
	address.
E-Mail Header	Normal, Don’t Print, Verbose. Dictates whether the e-mail
	header (text) is printed to the fax machine or stripped.
Print Errors	Yes, No. If enabled, prints errors on the fax machine as they
	occur.
Dial Method	Tone, Pulse-10, Pulse-20. The method of dialing supported by
	the telephone lines in your geographic region.
Need Dial Tone	Yes, No. Whether or not the IF-200 data modem used to
	connect to the Internet waits for dial tone before dialing the
	phone number. In some countries the dial tone is weak and
	should not be waited for.
Insert Comma After 9	Yes, No. Whether or not a comma should be inserted after 9
	when it is the first digit of a phone number dialed on the fax
	machine.
Poll Mode	Periodic, Scheduled, Disabled. Determines whether the IF-
	200 checks for mail according to the Poll Interval, the Poll
	Schedule or not at all.

24