IF-200 from Muratec
2.Plug one end of the telephone line cord that came with the IF-200 into the “telco” or “line” jack on the fax machine. Plug the other end of the cord into the “FAX” connector on the IF-200 rear panel.
3.Plug one end of the Category 5 patch cable (supplied) into the LAN jack (RJ-45) on the rear panel of the IF-200. Connect the other end of the Category 5 Patch cable to the 10 Base T Ethernet connection. The green LED is lit when the IF-200 is connected to the network. The yellow LED lights up whenever there is activity across the LAN connection.
4.Plug the AC power adapter cord into the 12 VAC 1AMP connector on the IF-200 rear panel. Plug the adapter into a 110 VAC wall outlet.
