3Com MSR 50, MSR 30 manual Display fr map-info pppofr, 377, Dlci = 100, IP Inarp

377

<Sysname> display fr map-info

Map Statistics for interface Serial2/0 (DTE) DLCI = 100, IP INARP 100.100.1.1, Serial2/0 create time = 2002/10/21 14:48:44, status = ACTIVE encapsulation = ietf, vlink = 14, broadcast

DLCI = 200, IP INARP 100.100.1.1, Serial2/0 create time = 2002/10/21 14:34:42, status = ACTIVE encapsulation = ietf, vlink = 0, broadcast

DLCI = 300, IP 1.1.1.1, Serial2/0

create time = 2002/10/21 15:03:35, status = ACTIVE encapsulation = ietf, vlink = 15

Table 45 Description on the fields of the display fr map-info command

Field	Description
Map Statistics for interface	Display the frame relay address map. The interface operates
Serial2/0 (DTE)	in DTE mode.
DLCI = 100, IP INARP	The PVC with DLCI 100 is mapped to remote IP address
100.100.1.1, Serial2/0	100.100.1.1 through INARP. The PVC is configured on the
	interface Serial2/0 (If the keyword INAPP is not provided,
	you need to manually configure established address
	mapping.)
create time = 2002/10/21	Time and date when the map entry was created
14:48:44
status = ACTIVE	State of the map entry
encapsulation = ietf	Encapsulation is set to IETF
broadcast	Broadcasts are permitted

display fr map-info pppofr

Syntax	display fr map-info pppofr [ interface interface-type{ interface-number
	interface-number.subnumber } ]
View	Any view
Parameter	interface interface-type { interface-number interface-number.subnumber }:
	Specifies an interface by its type and number. It can be a main or subinterface. The
	interface-typeargument is an interface type. The interface-numberargument is a
	main interface number. The subnumber argument is a subinterface number, in the
	range 0 to 1023.
Description	Use the display fr map-info pppofr command to display current PPP over
	frame relay (PPPoFR) mappings and their states for the specified or all interfaces.

Example # Display information about current PPPoFR mappings and their states.

<Sysname> display fr map-info pppofr
Fr Interface	DLCI	Fr State	PPP Interface	PPP Phase
Serial2/0	100	down	Virtual-Template1	Phase:0
Serial2/1	200	down	Virtual-Template2	Phase:0