3Com MSR 30, MSR 50 manual Snmp-agent target-host, Related command Display snmp-agentsys-info

2342 CHAPTER 154: SNMP CONFIGURATION COMMANDS

	version: The SNMP version in use.
	■ all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
	■	v1: SNMPv1.
	■	v2c: SNMPv2c.
	■	v3: SNMPv3.
Description	Use the snmp-agentsys-infocommand to configure system information,
	including the contact information, the location, and the SNMP version in use.
	Use the undo snmp-agent sys-info contact command and the undo
	snmp-agentsys-info location command to restore the default.
	Use the undo snmp-agentsys-info version command to disable use of the
	SNMP function of the specified version.
	By default, the location information is Hangzhou China, version is SNMPv3, and
	the contact is Hangzhou H3C Technology Co., Ltd.
Related command:	display snmp-agentsys-info.
	Network maintenance switch fabricers can use the system contact information to
n get in touch with the manufacturer in case of network failures. The system
	location information is a management variable under the system branch as
	defined in RFC1213-MIB, it identifies the location of the managed object.
Example	# Configure the contact information as “Dial System Operator at beeper #
	27345”.
	<Sysname> system-view
	[Sysname] snmp-agent sys-info contact Dial System Operator at beeper # 27345
snmp-agent target-host
Syntax	snmp-agent target-host trap address udp-domain { ip- address ipv6 ipv6-
	address } [ udp-portport-number ] [ vpn-instancevpn-instance-name ] params
	securityname security-string[ v1 v2c v3 [ authentication privacy ] ]
	undo snmp-agent target-host { ip- address ipv6 ipv6- address } securityname
	security-string [ vpn-instancevpn-instance-name ]
View	System view
Parameter	trap: Specifies the host to be the Trap host.
	address: Specifies the IP address of the target host for the SNMP messages.

udp-domain: Indicates that the Trap message is transmitted using UDP.

ip-address:The IPv4 address of the Trap host.