3Com MSR 50, MSR 30 manual Ipx split-horizon, Ipx tick, Undo ipx split-horizon

2549

hop hop-count: Number of hops to reach the server, ranging from 1 to 15. Note that hop count more than or equal to 16 implies the service is unreachable.

preference preference: Preference of service information, ranging from 1 to 255. The smaller the value, the higher the preference. By default, the preference of the static service information items is 60 and is configurable, and the preference of the dynamic items is 500 and cannot be configured.

all: Deletes all static service information items.

Description Use the ipx service command to add an IPX static service information item.

Use the undo ipx service command to delete an IPX static service information item.

Example # Add a static service information item with the service type being 4, service name “FileServer”, server network ID 130, node value 0000-0a0b-abcd, server hop 1 and server preference 60.

<Sysname> system-view

[Sysname] ipx service 4 FileServer 130.0000-0a0b-abcd 451 hop 1 preference 60

ipx split-horizon

Syntax	ipx split-horizon
	undo ipx split-horizon
View	Interface view
Parameter	None
Description	Use the ipx split-horizoncommand to enable split horizon on the current
	interface.
	Use the undo ipx split-horizoncommand to disable split horizon on the current
	interface.
	By default, split horizon is enabled on the interface.
Example	# Enable split horizon on the interface Ethernet1/0.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] ipx split-horizon

ipx tick

Syntax ipx tick ticks undo ipx tick