3Com MSR 30, MSR 50 manual Accounting-on enable interval, Accounting-on enable send

1950 CHAPTER 128: RADIUS CONFIGURATION COMMANDS

accounting-on enable interval

Syntax accounting-on enable interval seconds

undo accounting-on interval

View RADIUS scheme view

Parameter seconds: Time interval to retransmit accounting-on packet in seconds, ranging from 1 to 15.

Description Use the accounting-on enable interval command to configure the retransmission interval of accounting-on packets.

Use the undo accounting-on enable interval command to restore the default.

By default, the retransmission interval of accounting-on packets is 3 seconds.

Note that:

■This command is applicable to centralized devices only.

■Execution of this command does not affect the results of other accounting-on related commands such as accounting-on enable. That is, execution of the undo accounting-on enable interval command will not disable the accounting-on function.

■The retransmission interval configured with this command takes effect immediately.

Related command: radius scheme, accounting-on enable

Example # In RADIUS scheme rd, set the retransmission interval of accounting-on packet to 5 seconds.

<Sysname> system-view

[Sysname] radius scheme rd

[Sysname-radius-rd] accounting-on enable interval 5

accounting-on enable send

Syntax accounting-on enable send send-times

undo accounting-on send

View RADIUS scheme view

Parameter send-times: Maximum number of accounting-on packet retransmission attempts, ranging from 1 to 255.