3Com MSR 50, MSR 30 manual 177, Display voice gateway, Syntax area-id string Undo area-id string

177

area-id

H.323 CONFIGURATION COMMANDS

Syntax area-id string

undo area-id [string ]

View Gatekeeper client view

Parameter string: Area ID, a digit string that is 1 to 31 characters in length. The pound signs

(#) can be used as delimiters in the string.

Description Use the area-idcommand to assign an area ID to the H.323 gateway.

Use the undo-area-idcommand to remove the specified or all area IDs.

By default, no area ID is assigned to the H.323 gateway.

Each area ID identifies a particular type of gateway, for example, 1# for the voice gateway and 2# for the video gateway, depending on the agreement that the gateway and the gatekeeper reaches beforehand. When a VoIP entity communicates with the gatekeeper, the gatekeeper uses the received area ID to identify the type of the gateway.

You may assign up to 30 area IDs to the H.323 gateway.

Related command: match-templateon page 2599, entity on page 2594.

Example # Assign area ID 6# to the gateway.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] gk-client

[Sysname-voice-gk] area-id 6#

display voice gateway

Syntax display voice gateway

View Any view