3Com MSR 30, MSR 50 manual Ipx network, Ipx rip import-route static, Undo ipx network

2540 CHAPTER 172: IPX CONFIGURATION COMMANDS

Example # Enable Ethernet 1/0 to forward type 20 broadcast packets.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ipx netbios-propagation

ipx network

Syntax ipx network network-number

undo ipx network

View Interface view

Parameter network-number: IPX network ID in hexadecimal format. It ranges from 0x1 to 0xFFFFFFFD. Leading 0s can be omitted.

Description Use the ipx network command to configure a network ID for the interface.

Use the undo ipx network command to delete the IPX network ID of the interface.

By default, no network ID is allocated to an interface, that is, IPX is still disabled on the interface after IPX is enabled in system view.

Example # Assign network ID 675 to the interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ipx network 675

ipx rip import-route static

Syntax	ipx rip import-route static
	undo ipx rip import-route static
View	System view
Parameter	None
Description	Use the ipx rip import-route static command to enable static route
	redistribution into RIP. If successful, RIP routing updates will contain the
	redistributed static routes.
	Use the undo ipx rip import-route static command to disable static route
	redistribution.
	By default, IPX RIP does not redistribute static routes.