3Com MSR 30, MSR 50 manual Mpls rsvp-te authentication, Syntax mpls rsvp-te Undo mpls rsvp-te

1606 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

mpls rsvp-te

Syntax mpls rsvp-te

undo mpls rsvp-te

View MPLS view, interface view

Parameter None

Description Use the mpls rsvp-tecommand to enable RSVP-TE.

Use the undo mpls rsvp-tecommand to disable RSVP-TE.

By default, RSVP-TE is disabled.

You must enable RSVP-TE before you can configure other RSVP-TE features.

Before enabling RSVP-TE, enable MPLS in both system view and interface view.

Disabling RSVP-TE in MPLS view disables RSVP-TE on interfaces.

Example # Enable RSVP-TE on current node.

<Sysname> system-view [Sysname] mpls [Sysname-mpls] mpls rsvp-te

# Enable RSVP-TE on interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] mpls rsvp-te

mpls rsvp-te authentication

Syntax	mpls rsvp-te authentication { cipher plain } auth-key
	undo mpls rsvp-te authentication
View	Interface view
Parameter	cipher: Indicates that the specified authentication key is a cipher-text key.
	plain: Indicates that the specified authentication key is a plain-text key.
	auth-key: Authentication key, case sensitive. Input in plain text, the string for it is 8
	to 16 characters in length; input in cipher text, the string for it is 24 characters in
	length. If the plain keyword is specified, it can only be input in plain text. If the
	cipher keyword is specified, it can be input in both plain text or in cipher text.