Appendix B: Client Setup for 802.1x, WPA, and WPA-PSK

Enabling 802.1x Authentication and Security

1.Click Run from the Start menu. Type services.msc and click OK.

2.Scroll to the bottom of the list. Double click on the Wireless Zero Configuration service and verify that it is set to Automatic and that it is Started. Click OK to continue.

3.Click the Start button, select Control Panel, then Network

Connections.

4.Right click on your wireless network card and select Properties. Click on the Wireless Networks tab.

5.Click Add to continue.

6.Select the Association Tab, and enter the SSID of the AP. (e.g., Please)

7.Set Open as the Network Authentication from the drop down menu, and WEP for Data encryption.

8.Click OK, and then select the Authentication Tab.

153

Page 167
Image 167
Dynalink RTA1046VW user manual Enabling 802.1x Authentication and Security, 153, Connections