Dynalink RTA1046VW user manual 109, Select Wireless Network, Wireless Security

Chapter 4: Web Configuration

Security

To configure security features for the Wireless interface, please open Security item from Wireless menu. This web page offers eight authentication protocols for you to secure your data while connecting to networks. There are nine selections including 64-bit and 128-bit WEP, 802.1X, WPA, WPA-PSK, WPA2, WPA2-PSK, mixed WPA2/WPA, and mixed WPA2/WPA-PSK. Different item leads to different web page settings. Please read the following information carefully.

Select Wireless Network:

Select the wireless network which you want to configure the security settings from the drop down list.

Wireless Security:

The Disabled item offers you the less protection for wireless communication. If you choose Disabled, the Encryption Keys will not be shown on this page.

There are nine wireless security modes for you to select.

For 64-Bit WEP/ 128-Bit WEP

Wireless Security:

Select the WEP mode for the security function; there are two options, 64-bitand 128-bit. Before being transmitted, the data will be encrypted using the encryption key. For example, if you set 64-bit in this field, then the receiving station must be set to use 64 Bit Encryption, and have the same Key value at the same time; otherwise, it will not be able to decrypt the data.

109