Wireless IAD User Manual
Connection Type
The system provides several protocols for you to choose. Your ISP will offer you the most suitable settings of the protocol. Before you set this page, please refer to the protocol that your ISP offered.
After clicking on the Next button from the VPI/VCI web page, the following screen will appear. Please choose the connection type and encapsulation mode that you want to use and click Next for next page.
For instance, PPP over Ethernet (PPPoE) is selected in this demonstrative figure.
PPP over ATM/ PPP over Ethernet
If the connection type you choose is PPP over ATM or PPP over Ethernet, please refer to the following information.
According to the ISP’s configuration on the server, you can choose PPPoE or PPPoA modes.
Choose PPPoA or PPPoE and click Next.
On this screen, you have to make the settings for WAN IP. To get the IP address automatically, click the
Obtain an IP address automatically radio button. Or click Use the following IP address button and enter the IP address for WAN interface.
Check Enable NAT if you need.
MTU:
It means the maximum size of the packet that transmitted in the network. The packet of the data greater than the value set here will be divided into several packets for transmitting.
Type the value into the field of MTU. The default setting for PPPoE is 1492; while for PPPoA is 1500.
Click Next for the next procedure.
68
