Wireless IAD User Manual

Transmission Mode:

It decides the mode of data transmission. Choose the one that you want to use from the drop-down menu. There are 802.11b only, 802.11g only and Mixed Mode provided here.

Transmission Rate:

It decides the speed of data transmission. Choose any one of it by using the drop-down menu. This setting will change by the transmission mode that you set above. The transmission rate settings under 802.11b only include 1, 2, 5.5, 11Mbps and Auto. The transmission rates for 802.11g settings include 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps and Auto. As for mixed mode, only Auto is available.

Multicast Rate:

When the multicast transmitting traffics are large, the transmission will be delayed in some way. If you want to speed up the rate, modify from the drop-down list.

For example, you may select 802.11g only as the transmission mode, and select high multicast rate like 54 Mbps.

Turbo Mode:

When it is enabled, the data transmission will be faster for this device. Check Enabled to invoke this function for speeding up the transmission, or check Disabled to close this function.

Wireless User Isolation:

To make the communication between the clients, please choose Off. To cut the communication between the clients, please choose On.

Click Apply to invoke the settings.

108

Page 122
Image 122
Dynalink RTA1046VW user manual 108