![](/images/new-backgrounds/1179733/179733257x1.webp)
Chapter 4: Web Configuration
Access Control
The web page allows you to enable the wireless MAC control configuration.
Access Control:
Click Off to disable this function. Click On in Allow mode to allow the devices using matched MAC address to link to the AP. And click On in Deny mode to disturb the listed wireless MAC address to access the AP.
View Access Control List:
Click this button to view the wireless access control list and to add a new MAC address.
The Wireless Access Control List dialog allows you to add a new MAC address and view current MAC addresses that you had added.
To add a new MAC address to your wireless MAC address filter, click on the Add button.
MAC Address of Wireless adaptor:
Key in the MAC Address to be filtered.
And click Apply.
The result of the added MAC address will be shown on the table.
If you want to delete the added MAC address, simply click the delete
button, a dialog box will be prompted to confirm the deleting. Click Yes, and then the selected one will be erased.