Dynalink RTA1046VW user manual ADSL2 Compliance, ADSL2+ Compliance, Wireless LAN Compliance

Wireless IAD User Manual

ADSL2 Compliance

ITU G.992.3 Annex A (G.dmt.bis)

Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream

ADSL2+ Compliance

ITU G.992.5 Annex A

Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream

Wireless LAN Compliance

IEEE 802.11g and IEEE 802.11b

Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for 802.11b

Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK (2Mbps) for 802.11b; DBPSK (1 Mbps) for 802.11b

Network Architecture: infrastructure

Operating Frequency: 2.4 ~ 2.5 GHz

Operating Channels: depending on local regulations. For example, 11 Channels (Northern America), 13 Channels (Europe), and 14 Channels (Japan)

Support the selection of best quality channel automatically

RF Transmitter:
Target Output Power (EIP):		13.5 dBm (22mW) for 802.11g
		17.5 dBm (56mW) for 802.11b
Frequency Stability:		10 ppm
TX Spectrum Mask:		comply with IEEE802.11 b/g standard
RF Receiver
Sensitivity:	provide the implemented sensitivity and comply with
	IEEE802.11b/g standard
	Data Rate (Mbps)		Minimum sensitivity (dBm)
802.11g	6		￿ -86
	9		￿-84
	12		￿-82
	18		￿-80
	24		￿-78
	36		￿-75
	48		￿-70
	54		￿-68
802.11b	11		￿-85

Maximum input power: ￿-10dBm

Antenna: One external antenna is provided.

External Antenna: 2.4G~2.5GHz Dipole and Omni radiation antenna with 3 dBi peak gain

Coverage Area: 300 meters

Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with

x