Chapter 2: System Requirement and Installation
USB Driver Installation
If the Wireless IAD is connected to a PC through the USB interface, you will be prompted for the USB drivers when plugging the USB cable to the PC. Refer to the relevant operating system to install the USB drivers.
For Windows ME
nRun the USB installation program from the CD provided in your IAD package.
oAn InstallShield Wizard will appear. Please wait for a moment.
pWhen the welcome screen appears, click Next for the next step.
qWhen the complete window of the InstallShield Wizard appears, click Finish.
rLink your IAD and the PC with a USB cable.
sThe system will detect the USB driver automatically. Then, the system will copy the proper files for this IAD.
Note: If the USB device is not detected automatically, check the USB cable between the PC and the device. Besides, verify that the device is power on.
tWhen the file copying finished, the dialog above will close. Now the USB driver is installed properly. You can use the IAD.
For Windows 2000
nRun the USB installation program from the CD provided in your IAD package.
oAn InstallShield Wizard will appear. Please wait for a moment.
pWhen the welcome screen appears, click Next for the next step.
5
