Wireless IAD User Manual
Connect to ACS:
Choose to connect to ACS with or without SSL (Secure Socket Layer) protocol according to your ISP.
If the ACS URL starts with http://, choose without SSL mode; if it begins with https://, select with SSL.
ACS URL Address:
Key in the
ACS User Name/ ACS Password: When connecting to ACS, this device must have correct user name and password for authentication. Key in the information provided by the ISP.
When the content of ACS URL Address, User Name, and Password match the ACS authorization, the IAD will send an online report to ACS.
Connection Request User
Name/Password:
If the ACS wants to communicate with the device, it will have to offer the matching Connection Request User Name and Password. When the device sends the report to ACS for the first time, it will contain information for this.
Periodic Transmission of Inform
Request:
If this function is enabled, the CPE will frequently report to ACS the status after a period of time set here. The default setting is 300 seconds, and the ISP can modify the value. Generally, users do not have to change the settings here.
If this function is disabled, the CPE will only report once when the connection between ACS and the device has been set up.
Identify the Validation of Certificate from ACS
When using SSL protocol to connect to ACS, a trusted CA and synchronic time setting with the server are used to identify the validation of the Certificate sent from ACS.
When choosing with SSL for Connect to ACS, you will see a paragraph appear on the bottom of the window (as shown in the right column).
