Before You Use
Support the Access Control function: only registered WLAN clients are allowed to associate to this device.
SSID can be hidden for the security issue (Don’t broadcast SSID).
Two SSIDs are supported currently. One SSID can be used for main wireless network and the other SSID can be used for guest wireless network. Two wireless networks can be configured in different wireless security level
Support the Repeater function to extend the coverage area Support wireless user isolation for the hotspot
Voice over IP Features
Call Feature: basic outgoing and incoming call, Call Waiting, Three Party Conference, Call Transfer, Caller ID
Call Control: support MGCP (RFC2705) or SIP (RFC3261)
Voice Transport: compliance to RTP (RFC1889)
Voice Codec: G.711
Tone/Ring Signal: compliance to North America, UK, France, Netherlands, Germany, Switzerland, etc.
Tone Generation: support dial tone, ring back tone, busy tone, ring tone, and various tones on demand
Tone Detection: support DTMF
Echo Cancellation: compliance to G.168
Support RFC2833 RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals
Support RFC3842 Voice Message Waiting Indication
Two VoIP (FXS) ports for VoIP phone calls
Both VoIP ports supporting intelligent lifeline backup
Manual selection of PSTN mode or VoIP mode while making a phone call
Automatic selection of PSTN phone call on dialing the emergency calls
Traffic flow control to guarantee voice quality
Support FAX/Analog Modem function
Support T.38 Fax relay1
ATM Features
Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs)
Support up to 16 PVCs for UBR, CBR,
RFC2684 LLC Encapsulation and VC Multiplexing over AAL5
RFC2364
RFC2225 Classical IP and ARP over ATM
RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding) and
Client functions
1T.38 fax relay can be supported on demand.
xi
