Wireless IAD User Manual
Local Network – DHCP Server
This allows you to set DHCP server on LAN interface.
DHCP Server On:
Check this item if DHCP service is needed on the LAN. The IAD will assign IP address and gateway address for each of your PCs.
You have to key in Start IP Address, End IP Address, and Lease Time. The default lease time is 1day.
Relay On:
Click this button to have a relay setting. And type the Server IP in the IP field.
When the DHCP server is served by another device rather than the IAD itself, you can relay to that specific server and enter the IP address of it, as 10.3.95.2 in our example.
Server and Relay Off:
Check this item if DHCP service isn’t needed on the LAN.
Apply:
Click this button to activate the settings listed above.
You can reserve one specific IP address for a certain PC for particular purpose. Simply add a mapping entry of MAC address & IP address for that PC by pressing the Reserved IP Address List button. The window as the one shown in the right column will appear.
Click the Add button to open another dialog window, shown as the right. On PC’s MAC Address and Assigned IP Address boxes, please type the correct information according to your need and click Apply.
80
