3Com MSR 50, MSR 30 manual Display rip interface, Display rip route, 1165

1165

display rip interface

Syntax display rip process-id interface [ interface-type interface-number ]

View Any view

Parameters process-id: RIP process number, in the range of 1 to 65535. interface-typeinterface-number: Specifies an interface.

Description Use the display rip interface command to display the RIP interface information of the RIP process.

If no interface is specified, information about all RIP interfaces of the RIP process is displayed.

Examples # Display all the interface information of RIP process 1.

<Sysname> display rip 1 interface

Interface-name: Ethernet1/0

Address/Mask:1.1.1.1/24MetricIn/Out:0/1 Version: RIPv1

Split-horizon/Poison-reverse:on/off Input/Output:on/on

Current packets number/Maximum packets number: 234/2000

Table 280 Description on the fields of the display rip interface command

Field	Description
Interface-name	The name of an interface running RIP.
Address/Mask	The IP address and Mask of the interface.
MetricIn/Out	Additional routing metric added to the incoming and outgoing
	routes
Version	RIP version running on the interface
Split-horizon	Indicates whether the split-horizon is enabled (ON: enabled, OFF:
	disabled).
Poison-reverse	Indicates whether the poison-reverse is enabled (ON: enabled,
	OFF: disabled)
Input/Output	Indicates if the interface is allowed to receiving (Input) or sending
	(Output) RIP messages (on is allowed, off is not allowed).
Current packets	Packets to be sent/Maximum packets that can be sent on the
number/Maximum packets	interface
number

display rip route

Syntax display rip process-id route [ statistics ip-address { mask mask-length } peer ip-address ]

View Any view

Parameters process-id: RIP process number, in the range of 1 to 65535.