FAX OVER IP CONFIGURATION

176 COMMANDS

default entity fax

Syntax

default entity fax baudrate { 2400 4800 9600 14400 disable voice }

 

default entity fax ecm

 

default entity fax level level

 

default entity fax local-train threshold threshold

 

default entity fax nsf-on

 

default entity fax protocol { standard-t38 t38 } [ hb-redundancy number

 

lb-redundancy number ]

 

default entity fax protocol pcm { g711alaw g711ulaw }

 

default entity fax train-mode { local ppp }

 

undo default entity fax { baudrate ecm level local-train threshold nsf-on

 

protocol train-mode }

View

Voice dial program view

Parameter

baudrate: Specifies the maximum transmission rate of the fax. The default value

 

is voice.

 

2400: Sets the maximum transmission rate to 2400 bps.

 

4800: Negotiates the baud rate first in accordance with the V.27 fax protocol.

 

The maximum transmission rate is 4800 bps.

 

9600: Negotiates the baud rate first in accordance with the V.29 fax protocol.

 

The maximum transmission rate to 9600 bps.

 

14400: Negotiates the baud rate first in accordance with the V.17 fax protocol.

 

The maximum transmission rate to 14400 bps.

 

disable: Disables the fax forwarding capability.

 

voice: Sets the fax rate to the allowed maximum voice speed for different

 

codec protocols.

 

ecm: Enables the fax error correction mode. It is disabled by default.

 

level level: Specifies the fax signal level in dBm (in the range of -60 to -3). The

 

default value is -15.

Page 2679
Image 2679
3Com MSR 50, MSR 30 manual FAX Over IP Configuration Commands, Default entity fax